-
Record Type: Instruction
-
Directive Number: CPL 2.86
-
Subject: Memorandum of Understanding Between the OSHA and the U.S.
Nuclear Regulatory Commission
-
Information Date: 12/22/1989
OSHA Instruction CPL 2.86
December 22, 1989
Office of General Industry
Compliance Assistance
Subject: Memorandum of Understanding Between the Occupational Safety and
Health Administration and the U.S. Nuclear Regulatory Commission
A. Purpose. This instruction provides guidelines for implementing the
Memorandum of Understanding (MOU) of October 21, 1988, between the Occupational
Safety and Health Administration (OSHA) and the U.S. Nuclear Regulatory
Commission (NRC). (See Appendix A.)
B. Scope. This instruction applies OSHA-wide.
C. Action. Regional Administrators and Area Directors shall ensure that
the MOU is effectively implemented in accordance with the guidelines in
F. and Appendix A of this instruction.
D. Federal Program Change. This instruction describes a Federal program
change which affects State programs. Each Regional Administrator shall:
1. Ensure that this change is forwarded to each State designee.
2. Explain the technical content of the change to the State designee
as requested.
3. Encourage the State to honor the jurisdictional limits established
in the OSHA/NRC Memorandum of Understanding, and to coordinate activities
with NRC and the Regional Offices as provided in the MOU.
4. Ensure that State designees acknowledge receipt of the Federal program
change in writing, to the Regional Administrator within 30 days of notification,
as to whether the State will honor the MOU. This acknowledgment should
include:
(a) The State's plan to adopt and implement and MOU, modified only to
correspond to the organizational structure of the State plan;
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
(b) The State's plan to develop alternative procedures to those in the
instruction and the MOU which are as effective; or,
(c) The reason why it is not necessary for the State to adopt the Federal
procedures.
5. Review policies, instructions and guidelines issued by the State
to determine if this change has been communicated to State program personnel.
E. Background. NRC-licensed nuclear facility hazards have been divided
into the following four types:
1. Radiation hazards produced by radioactive materials.
2. Chemical hazards produced by radioactive materials.
3. Plant conditions which affect the safety of radioactive materials
and thus present an increased radiation hazard to workers. For example,
conditions that could produce fire or an explosion, and thereby cause a
release of radioactive materials of an unsafe reactor condition.
4. Plant conditions which result in occupational hazards, but do not
affect the safety of the licensed radioactive materials. For example, exposures
to toxic non-radioactive material and other industrial hazards in the workplace.
NOTE: Generally, NRC covers the first three hazards and OSHA covers
the fourth hazard.
F. Guidelines. Sections 6. through 13. of the MOU establish interface
procedures. Within the framework of these guidelines, the following will
be adhered to:
1. Regional Administrators shall maintain contact with the appropriate
NRC Regional Administrators in order to expedite answers to jurisdictional
and other issues. A current list of NRC Regional Offices and personnel
is included in Appendix B.
2. If a jurisdictional question arises which cannot be resolved at the
regional level, or if guidance is required to make a decision, or if the
issue has
2
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
nationwide impact, telephone the office of General Industry Compliance
Assistance.
3. Fatality, catastrophe, and complaint inspections shall continue as
before, in OSHA jurisdictional areas as depicted in E.4., above. However,
OSHA personnel shall refer to NRC any observations relating to areas where
increased management attention is required such as the following:
a. Lax security control or work practices that would affect nuclear
or radiological health and safety.
b. Improper posting of radiation areas.
c. Licensee employee allegations on NRC license or regulation violations.
4. Regional Administrators shall be the point of contact between NRC
and the State Plan States.
a. Regional Administrators shall assist State designees in establishing
staff contacts with NRC Regional Offices.
b. Jurisdictional matters that cannot be decided at the local level
shall be referred promptly by the State designee to the Regional Administrator
for assistance in resolution.
5. Plans in support of participation for the OSHA/NRC team assessments
(Section 9. of the MOU) shall be coordinated through the Office of Field
Programs (OFP). The Directorate of Policy (DOP) shall act as liaison with
NRC and refer information to OFP. OSHA State Plan States shall be encouraged
to participate.
6. Regional Administrators shall provide compliance personnel to participate
in the OSHA/NRC team assessments (Section 9 of the MOU). OSHA's portion
of the team assessments shall be treated as enforcement inspections and
citations shall be issued to the inspected establishments as appropriate.
3
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
7. Plans in support of participation in training as described in Section
11. of the MOU shall be handled by the Directorate of Federal-State Operations
in coordination with DOP. DOP shall act as liaison among the affected parties,
as required.
8. The Regional Administrators shall ensure that their staffs comply
with the applicable ionizing radiation standards, 29 CFR 1910.96.
G.F. Scannell Assistant Secretary
DISTRIBUTION: National, Regional and Area Offices All Compliance Officers
State Designees 7(c)(1) Project Managers NIOSH Regional Program Directors
4
OSHA Instruction CPL 2.86 December 22,1989 Office of General Industry
Compliance Assistance
Appendix A
MEMORANDUM OF UNDERSTANDING BETWEEN THE U.S. NUCLEAR REGULATORY COMMISSION
AND THE OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
PURPOSE AND BACKGROUND
1. The purpose of this Memorandum of Understanding between the U.S.
Nuclear Regulatory Commission (NRC) and the Occupational Safety and Health
Administration (OSHA) is to delineate the general areas of responsibility
of each agency; to describe generally the efforts of the agencies to achieve
worker protection at facilities licensed by the NRC; and to provide guidelines
for coordination of interface activities between the two agencies. If NRC
licensees observe OSHA's standards and regulations, this will help minimize
workplace hazards.
2. Both NRC and OSHA have jurisdiction over occupational safety and
health at NRC-licensed facilities. Because it is not always practical to
sharply identify boundaries between the nuclear and radiological safety
NRC regulates and the industrial safety OSHA regulates, a coordinated interagency
effort can insure against gaps in the protection of workers and at the
same time, avoid duplication of effort. This memorandum replaces an existing
procedure for interagency activities, "General Guidelines for Interface
Activities between the NRC Regional Offices and the OSHA."
HAZARDS ASSOCIATED WITH NUCLEAR FACILITIES
3. There are four kinds of hazards that may be associated with NRC-licensed
nuclear facilities:
a. Radiation risk produced by radioactive materials; b. Chemical risk
produced by radioactive materials; c. Plant conditions which affect the
safety of radioactive materials and thus present an increased radiation
risk to workers. For example, these might produce a fire or an explosion,
and thereby cause a release of radioactive materials or an unsafe reactor
condition; and, d. Plant conditions which result in an occupational risk,
but do not affect the safety of licensed radioactive materials. For example,
there might be exposure to toxic nonradioactive materials and other industrial
hazards in the workplace.
Generally, NRC covers the first three hazards listed in paragraph 3
(a, b, and c), and OSHA covers the fourth hazard described in paragraph
3 (d). NRC and OSHA responsibilities and actions are described more fully
in paragraphs 4 and 5 below.
NRC RESPONSIBILITIES
4. NRC is responsible for licensing and regulating nuclear facilities
and materials and for conducting research in support of the licensing and
regulatory process, as mandated by the Atomic Energy Act of 1954, as amended;
the Energy Reorganization Act of 1974, as amended; and the Nuclear Nonproliferation
Act of 1978; and in accordance with the
A-1
OSHA Instruction CPL 2.86 December 22, 1989 Office Of General Industry
Compliance Assistance
National Environmental policy Act of 1969, as amended, and other applicable
statutes. These responsibilities cover the first three nuclear facility
hazards identified in paragraph 3 (a, b, and c). NRC does not have statutory
authority for the fourth hazard described in paragraph 3(d).
NRC responsibilities include protecting public health and safety; protecting
the environment; protecting and safeguarding materials and with antitrust
laws for certain types of facilities, e.g., nuclear power plants in the
interest of national security; and assuring conformity reactors. Agency
functions are performed through: standards setting and rulemaking; technical
reviews and studies; conduct of public hearings; issuance of authorizations,
permits and licenses; inspection, investigation and enforcement; evaluation
of operating experience; and confirmatory research.
OSHA RESPONSIBILITIES
OSHA is responsible for administering the requirements established under
the Occupational Safety and Health Act (OSH Act) (29 U.S.C. 651 et. seq.),
which was enacted in 1970. OSHA'S authority to engage in the kinds of activities
described below does not apply to those workplace safety and health conditions
for which other Federal agencies exercise statutory authority to prescribe
and enforce standards, rules or regulations.
Under the OSH Act, every employer has a general duty to furnish each
employee with a place of employment that is free from recognized hazards
that can cause death or serious physical harm and to comply with all OSHA
standards, rules, and regulations.
OSHA standards contain requirements designed to protect employees against
workplace hazards. In general, safety standards are intended to protect
against traumatic injury, while health standards are designed to address
potential overexposure to toxic substances and harmful physical agents,
and protect against illnesses which do not manifest themselves for many
years after initial exposure.
OSHA standards cover employee exposures from all radiation sources not
regulated bY NRC examples include x-ray equipment, accelerators accelerator-produced
materials, electron microscopes and betatrons, and naturally occurring
radioactive materials such as radium.
It is estimated that the Act covers nearly 6 million workplaces employing
more than 50 million workers. Federal OSHA covers approximately three-fifths,
or four million, of these States which operate OSHA-approved job safety
and health programs, or "Plans," cover the remainder.
OSHA State plan States are encouraged, but not required, to delineate
their authority for occupational safety and health at NRC-licensed facilities
in the same manner as Federal OSHA.
The OSHA areas of responsibility described in this memorandum are subject
to all applicable requirements and authorities of the OSH Act. However,
the industrial safety record at NRC-licensed nuclear power plants is such
that OSHA inspections at these facilities are conducted normally as a result
of accidents, fatalities, referrals, or worker complaints.
A-2
OSHA Instruction CPL 2.86 Office of General Industry Compliance Assistance
INTERFACE PROCEDURES:
6. In recognition of the agencies' authorities and responsibilities
enumerated above, the following procedures will be followed:
Although NRC does not conduct inspections of industrial safety, in the
course of inspections of radiological and nuclear safety, NRC personnel
may identify safety concerns within the area of OSHA responsibility or
may receive complaints from an employee about OSHA-covered working conditions.
In such instances, NRC will bring the matter to the attention of licensee
management. NRC inspectors are not to perform the role of OSHA inspectors;
however, they are to elevate OSHA safety issues to the attention of NRC
Regional management when appropriate. If significant safety concerns are
identified or if the licensee demonstrates a pattern of unresponsiveness
to identified concerns, the NRC Regional Office will inform the appropriate
OSHA Regional Office. In the case of complaints, NRC will withhold, from
the licensee, the identity of the employee. In addition, when known to
NRC, NRC will encourage licensees to report to OSHA accidents resulting
in a fatality or multiple hospitalizations.
When such instances occur within OSHA State Plan States' jurisdiction,
the OSHA Regional Office will refer the matter to the State for appropriate
action.
7. OSHA Regional Offices will inform the appropriate NRC Regional Office
of matters which are in the purview of NRC, when these come to their attention
during Federal or State safety and health inspections or through complaints.
The following are examples of matters that would be reported to the NRC:
a. Lax security control or work practices that would affect nuclear
or radiological health and safety. b. Improper posting of radiation areas.
c. Licensee employee allegations of NRC license or regulation violations.
8. The NRC and OSHA need not normally conduct joint inspections at NRC-licensed
facilities. However, under certain conditions, such as investigations or
inspections following accidents or resulting from reported activities as
discussed in items 6 and 7 above, it may be mutually agreed on a case-by-case
basis that joint investigations are in the public interest.
9. The chemical processing of nuclear materials at some NRC-licensed
fuel and materials facilities presents chemical and nuclear operational
safety hazards which can best be evaluated by joint NRC-OSHA team assessments.
Each agency will make its best efforts to support such assessments at about
20 facilities once every five years. Of these facilities, about one-third
are in the OSHA Plan States. OSHA will also assist in promoting such participation
by State personnel in OSHA Plan States.
10. Based upon reports of injury or complaints at nuclear power plant
sites, OSHA will provide NRC with information on those sites where increased
management attention to worker safety is needed. The NRC will bring such
information indicating significant breakdown in worker safety to the attention
of licensee management and monitor corrective actions. This will not interfere
with OSHA authority and responsibility to investigate industrial accidents
and worker complaints.
A-3
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
11. Power reactor sites are inspected by NRC Region-based and Resident
Inspectors. Personnel from NRC Regional Offices routinely conduct inspections
at most fuel and materials licensed facilities. In order to enhance the
ability of NRC personnel to identify safety matters under OSHA purview
during nuclear and radiological safety inspections, OSHA will provide NRC
Regional personnel with basic chemical and industrial safety training and
indoctrination in OSHA safety standards, consistent with ongoing OSHA training
programs. To enhance the ability of OSHA and State Plan personnel to effectively
participate in the Operational Safety Team Assessments, NRC will provide
training in basic radiation safety requirements, consistent with ongoing
NRC training programs. Details of such training will be as mutually agreed
by the NRC Technical Training Center and the OSHA National Training Institute.
12. Resolution of policy issues concerning agency jurisdiction and operational
relations will be coordinated by the NRC Deputy Executive Director for
Operations, and by the OSHA Director of Policy. Appropriate Headquarters
points of contact will be established.
13. Resolution of issues concerning inspection and enforcement activities
involving both NRC and OSHA jurisdiction at NRC-licensed facilities will
be handled between NRC's Office of Enforcement and OSHA's Directorate of
Compliance Programs. Each NRC and OSHA Regional Office will designate points
of contact for carrying out Interface activities.
FOR THE NUCLEAR REGULATORY COMMISSION FOR-THE OCCUPATIONAL SAFETY AND
HEALTH ADMINISTRATION
Victor Stello, Jr. John A. Pendergrass Executive Director for Operations
Assistant Secretary
October 21, 1988
A-4
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
Appendix B
NRC Regions
Region I
475 Allendale Road King-of-Prussia, PA 19406 FTS 346-5299
NH, VT, MA, RI, NY, DE, MD, PA, and District of Columbia
Region II
101 Marietta Street Suite 2900 Atlanta, GA 30323 FTS 242-5500
WV, FL, GA, AL, MS, SC, NC, TN, KY, VA, Puerto Rico and U.S. Virgin
Islands
Region III
799 Roosevelt Road Glen Ellyn, IL 60137 FTS 388-5681
IN, MN, IA, WI, IL, MI, OH, MO
Region IV
611 Ryan Plaza Drive Suite 1000 Arlington, TX 76011 FTS 728-8225
UT, CO, NM, AR, LA, TX,OK, KS, NE, MT, ID, WY
B-1
OSHA Instruction CPL 2.86 December 22, 1989 Office of General Industry
Compliance Assistance
Region V
1450 Maria Lane Suite 210 Walnut Creek, CA 94596 FTS 463-3707
AZ, CA, OR, WA, NV, AK, HI, Guam
B-2
|